User Guide

CHAPTER 10
Insert Filter and Effects
148
Model: Use this pull-down menu to open the list of all available IR files. Additionally you can
also load your own audio files into Origami LE.
Positioner: Click this button to open the „Positioner“ feature. The „Positioner“ gets explained on
the next page.
Pre-delay: The moment the IR processor will start after the incoming audio signal. You can
assign positive and negative values. Positive values create a delayed start, with
negative values the beginning of the IR file gets skipped.
Time: Here you can assign if the IR file gets used completely or only by percentage of the
entire length.
Tail: Here you can assign the decay time of the IR file - depending on the „time“ value.
100% correspond to the entire length of the IR file less the „time“ portion.
Tail Curve: The curve characteristic of the decay phase (Tail).
High Cut: All frequencies of the IR file above the adjusted value get cut.
EQ: See chapter „Equalizer“.
Dry: Volume of the unprocessed audio signal.
Wet: Volume of the processed audio signal.
Output Gain: The output volume of the audio signal.