User Guide

CHAPTER 10
Insert Filter and Effects
140
Filter Delay
Same as „Delay“.
Additionally you have two more parameters:
Low Cut: Specifies the frequency, below which the audio signal gets cut.
High Cut: Specifies the frequency, above which the audio signal gets cut.
IMPORTANT: The parameters „Low Cut“ and „High Cut“ only correspond to the processed
(wet) signal.
Doubler
Doubler produces a simple duplication of the audio signal.
Time: Here you can assign the time distance between the original audio signal and the
duplicated signal.
Panorama: Panorama settings of the duplicated audio signal from 100L (left) to 100R (right).
Sync: Enables the synchronization of the „Time“ parameter (changes into a select pull-
down menu) to the tempo of your sequencer software (host).
Dry/Wet: Volume relation between the unprocessed (dry) and the processed (wet) audio signal.