User Guide

CHAPTER 10
Insert Filter and Effects
138
Dual band distortion
Dual Band Distortion splits the audio signal and produces an analog distortion. Each split gets
modulated separately.
Frequency: Sets the frequency value where the audio signal gets split.
Drive A: This is the range below the set frequency. The set dB value determines the volume of
the modulation.
Drive B: This is the range above the set frequency. The set dB value determines the volume of
the modulation.
Color: With „color“ you can make the modulated audio signal brighter or closer. Negative
values produce a closer sound, positive values produce a brighter sound.
Volume: The output volume of the audio signal.
Tube distortion
Tube Distortion produces an analog symmetric or asymmetric distortion of the audio signal.
Drive: The assigned dB value determines the volume level of the modulation.
Low Cut: Specifies the frequency, below which the audio signal gets cut.
HF Damp: All frequencies of the audio file above the set value get cut.
Shape: Here you can choose between symmetric and asymmetric processing.
Volume: The output volume of the audio signal.