User Guide

yellow tools INDEPENDENCE 1.0
Manual
135
Phaser
Like „Flanger“ also the „Phaser“ effect splits the input signal, manipulates the frequencies of one
split and then sums the two splits back together.
The result sounds similar to a flanger, but softer and subtler.
Speed: Determines the speed of the modulation in hertz.
Start Freq: Sets the start frequency of the Phaser effect.
Range: Determines the range around the start frequency in which the phaser modulation takes
place. 0% corresponds to no modulation, 100% corresponds to maximum modulation.
Feedback: Routes the delayed signal back to the module‘s input. Higher values create a more
intense effect..
Spread: Limitation of the panorama ratio from both sides simultaneously. 100% corresponds to
the full stereo panorama, 0% corresponds to mono.
Dry/Wet: Volume relation between the unprocessed (dry) and the processed (wet) audio signal.
Sync: Enables the synchronization of the „Speed“ parameter (changes into a select pull-
down menu) to the tempo of your sequencer software (host).