User Guide

CHAPTER 10
Insert Filter and Effects
134
Modulation
Chorus
Chorus doubles the audio signal and detunes the copy compared to the original signal. Thereby the
audio signal sounds softer and is more present.
Depth: Determines the level of the modulation in %.
Speed: Determines the speed of the modulation in hertz.
HF Damp: All frequencies of the audio file above the set value get cut.
Spread: Limitation of the panorama ratio from both sides simultaneously. 100% corresponds to
the full stereo panorama, 0% corresponds to mono.
Dry/Wet: Volume relation between the unprocessed (dry) and the processed (wet) audio signal.
Sync: Enables the synchronization of the „Speed“ parameter (changes into a select pull-
down menu) to the tempo of your sequencer software (host).
Flanger
Flanger doubles the audio signal and delays the copy compared to the original signal.
Unlike Chorus, Flanger uses shorter delays.
Depth: Determines the level of the modulation in %.
Speed: Determines the speed of the modulation in hertz.
HF Damp: All frequencies of the audio file above the set value get cut.
Feedback: Routes the delayed signal back to the module‘s input. Higher values create a more
intense effect.
Spread: Limitation of the panorama ratio from both sides simultaneously. 100% corresponds to
the full stereo panorama, 0% corresponds to mono.
Dry/Wet: Volume relation between the unprocessed (dry) and the processed (wet) audio signal.
Sync: Enables the synchronization of the „Speed“ parameter (changes into a select pull-
down menu) to the tempo of your sequencer software (host).