User Guide

yellow tools INDEPENDENCE 1.0
Manual
131
High Cut Filter
With the High Cut Filter you can cut high frequencies depending on the selected slope.
Slope: Pull-down menu to select the filter type and slope.
Frequency: Specifies the frequency, above which the audio signal gets cut.
Multi Mode Filter
The „Multimode Filter“ allows the usage of the three filter types „Low Pass“, „Band Pass“ and
„High Pass“ simultaneously.
Slope: Pull-down menu to select the slope.
Frequency: Specifies the frequency, above/below which the audio signal gets boosted/cut.
Resonance: Emphasis of the selected frequency from 0% (no emphasis) to 100% (maximum
emphasis).
Low Pass: Volume of the Low Pass part.
Band Pass: Volume of the Band Pass part.
High Pass: Volume of the High Pass part.