User Guide

yellow tools INDEPENDENCE 1.0
Manual
129
Filters
2D Filter
With the 2D Filter you can boost or cut the range of frequencies - depending on the selection of
your filter type and slope. Use the spot in the 2D matrix to edit both parameters „Frequency“ and
„Resonance“ simultaneously.
Slope: Pull-down menu to select the filter type and slope.
Frequency: Specifies the frequency, above/below which the audio signal gets boosted/cut.
Resonance: Emphasis of the selected frequency from 0% (no emphasis) to 100% (maximum
emphasis).
X-Filter
With X-Filter you can assign an infinitely variable fade between the three filter types „Low Pass“,
„Band Pass“ and „High Pass“.
Frequency: Specifies the frequency, above/below which the audio signal gets boosted/cut.
Resonance: Emphasis of the selected frequency from 0% (no emphasis) to 100% (maximum
emphasis).
Slope: Pull-down menu to select the slope.
Filter Mode: Fade between „Low Pass“, „Band Pass“ and „High Pass“ from 0% to 100%.