User Guide

CHAPTER 10
Insert Filter and Effects
126
Use the copy/paste options to transfer the current settings to another Layer, Section or Alternate
without having to save them before. Use the „rebuild menu“ option to refresh the presets pull-down
menu if you have copied presets into your Independence Data folder during your work.
IMPORTANT: If you load an insert fx bank ALL your currently loaded insert filters and effects
get replaced automatically!
The other way is to load or save individual insert filters and effect.
Click with your mouse on the „add insert fx“ pull-down menu. A list with all available inserts,
separated into nine main categories shows up. Select the insert you want to add to your channel,
Layer, Section or Alternate and release the mouse button. The selected insert gets added to the insert
display below the pull-down menu - always at the end of the currently added inserts.
You can add as many inserts as you want and thus create your custom virtual insert filter and effect
rack.
To remove a currently loaded insert simply select the insert you want to remove and click the
„remove“ button in the upper right corner of the insert display. To remove multiple inserts at the
same time, press and hold the „shift“ key and click on all inserts you want to remove. To avoid an
accidental removal of inserts you have to confirm this action additionally.
There is a main „bypass“ button in the upper left corner of the insert display. If activated ALL
currently loaded insert filters and effects get muted. Of course also each individual insert contains a
separate „bypass“ button.
IMPORTANT: If you save the settings of any insert as “autoload.ytp” file in the respective folder,
the currently adjusted parameter values get loaded as default when ever you add
the insert again!