User Guide

yellow tools INDEPENDENCE 1.0
Manual
125
Insert Filters and Effects
Manipulation is a very popular instrument to edit and customize your sounds. For this purpose
Independence offers over 30 stunning filters and effects in ultimate perfection. Since you can add
the available insert filters and effects to both your channels in the built-in Mixer and to the Flexible
Modifier Editor per Layer, Section or Alternate, all details and explanations in this chapter apply to
the Inserts in general, independent from where you may use them.
Regarding the Inserts there are some general but important statements:
• You can add unlimited! Insert filters and effects.
• You can change the order of the Inserts simply per drag‘n‘drop.
• Any Insert that contains a „sync“ button is fully synchronizable to your sequencer
software (host) or to the Independence internal tempo and you can also choose the mode of
synchronization.
• Beside the main „insert fx bank“ pull-down menu, that enables you to load, save and
copy/paste already prepared presets of multiple inserts, also each individual insert filter or effect
contains its own „preset“ pull-down menu that includes all these options.
• You can minimize the editing display of each insert with a click on the open/close triangle in the
upper left corner.
• Wherever you may save a preset of your custom insert settings, it will always be available in the
preset pull-down menus of both areas, the Mixer and the Flexible Modifiers.
IMPORTANT: The processing of the activated insert filters and effects will always be
calculated in the order top down.
Load, save & remove insert filters and effects
As soon as you work with Independence‘s insert filters and effect, the upper „insert menu bar“
comes up. There are two ways to load or save an insert filter or effect.
You can use the „insert fx bank“ pull-down menu to load or save a group of inserts at the same time.