User Guide

yellow tools INDEPENDENCE 1.0

Manual

117

Audio Out selection pull-down menu

Clicking on the Audio Out pull-down menu you will get a menu with all available outputs. Just

select the output channel you want and your channel gets routed accordingly.

The Audio Our pull-down menu always contains all currently available output channels, so you can

select any Mono, Stereo or Surround (Independence PSE only) channels at will.

Solo and Mute button

Solo and Mute are standard parameters of a channel to play or mute only the selected channel.

Level indicator

A very useful display! It always shows the maximum reached volume of your session. If you want

or need a new calculation of this value you can reset the level indicator with a click on the display.

Thus the prior value gets deleted and the current value gets calculated.

SHORTCUTS: If you hold the Mac Key (MAC OS X) or the Strg Key (Windows XP) and

then click the display, all level indicators of all channels of your session/Project

gets reset.

Volume fader and graphic level meter

Just a short comment to these self-explanatory parameters:

Depending on the type of the channel (Mono, Stereo, Surround 5.0, 5.1, etc.) the dynamic level

meter switches automatically to the „correct“ display form. So the level meter of a Mono channel

(of any kind) is displayed with only one bar, for example, or a Surround 5.0 channel with 5 smaller

bars.

Volume chart

Next to the volume fader of the „volume fader and graphic level meter“ area you can also use this

parameter to change the volume. The volume display additionally shows the precise position in dB.

TIP: To get an even ﬁner adjustment of the volume you can also enter the desired value directly

or push and hold the SHIFT Key (Mac OS X and Windows XP), click on the value and drag

or and down.