Flaring Tool Spec Sheet

Lightweight, compact and portable
Quick-connect feature on yoke
Built-in slide gauge stops tubing at
the proper are height
●
●
Ritchie Engineering Company, Inc.
YELLOW JACKET Products Division
10950 Hampshire Avenue South
Bloomington, MN 55438-2623 USA
Phone: [phone]
or [phone]
e-mail: [e-mail]
www.yellowjacket.com
●
UPC # Replacement Parts
60428 Replacement case for 60430/60431
60432 Lightweight 60430/60431 bar, inch
60433 Lightweight 60431 bar, metric
60434 Replacement yoke for 60430/60431
60435 6 mm swage pin for 60431
60436 8 mm swage pin for 60431
60471 10 mm swage pin for 60431
60437 12 mm swage pin for 60431
60438 16 mm swage pin for 60431
60451 18 mm swage pin for 60431
60452 Flaring cone for 60430/60431
60472 1/4" swage pin for 60430
60473 5/16" swage pin for 60430
60474 3/8" swage pin for 60430
60477 1/2" swage pin for 60430
60478 5/8" swage pin for 60430
60479 3/4" swage pin for 60430
Lightweight Swage/
Flare Kit
The aluminum body and bar of the YELLOW
JACKET Lightweight Swaging and Flaring Tool
makes it half the weight of traditional steel designs.
• Six quick-change positions for aring soft copper
and aluminum tube
• The chrome nish of the swaging pins allows for an
easy swaging operation
• Strong aluminum bars - each hole are tested more
than 1000 times
UPC # Kit Swaging/Flaring Sizes
60430 Imperial: 6 positions for 1/4, 5/16, 3/8, 1/2, 5/8
and 3/4” O.D. tube
60431 Imperial: 6 positions for 1/4, 5/16, 3/8, 1/2, 5/8
and 3/4” O.D. tube
Metric: 6 positions for 6, 8, 10, 12, 16 and 18
mm O.D. tube; hex wrench included
features, cont.
• Swage pin sizes are molded into the case for easy
organization and differentiation
• Quick connect feature on lightweight yoke saves time
during pin/cone changing
• Built-in slide gauge to easily meet the desired are
sizes without the guesswork
• One yoke for both aring and swaging
• Blow-molded carrying case included
60431 also includes metric bar
and six metric swage pins
60430 Imperial Kit