Manualshelf

Owner Manual

ManualsBrandsYEFU ManualsBarn Door HardwareStandard Single Track Barn Door Hardware Kit
1234567
4
Step 4: Connect Tracks And Install Door Stoppers
a.Connect your tracks with junction plates if needed.
b.Loosely install the Door Stoppers near each end of the track (final positioning will
be determined at the end of the installation (Step 9)).
Prepare and Install the Tracks
Step 5:Draw Line for the Track
Using a level, draw a line to install the Track, at the door height + 1-3/8” above
the floor.
door height + 1-3/8”
Step 3: Install anti-jump pad
As shown in the illustration, the screw is near the front edge of your door (rec-
ommended: drill pilot hole to avoid splitting). Do not over tighten.