User Manual

5
03 Works with Mijia
"Works with Mijia"means that the product can be control by Mi Home app or xiaoai.
Please note that "Works with Mijia" only performs software-level verification. Xiaomi
and Mijia are not responsible for the manufacturing, standard implementation and quality
supervision of the products and enterprises.
Apple HomeKit Smart Control
1. Open the Home app on your iPhone or iPad.
2. Tap "Add Accessories" and follow the instructions to scan the QR code either on the
back cover of the user manual or on the lamp, or enter the 8-digit setup code above the
QR code to grant the Apple
Home app access.
* Make sure a Wi-Fi network with Internet access is available (this product does not
support 5 GHz networks). To control this HomeKit-compatible accessory, it is
recommended that you use iOS 9.0 or above. The HomeKit setup code is in the user
manual and on the lamp, do not lose it. When adding the product to the Home app after
the factory settings are restored, you will need the HomeKit setup code again. In case the
user manual is lost, scan the QR code or enter the setup code on the lamp.
iPad and iPhone are the trademarks of Apple Inc., and they areregistered in the United
States and other countries.
Specification
Model:
YLQPD-0011
Lamp Holder:
E27
Rated Power:
9 W
Luminous Flux:
806 lumens
Rated Input:
220-240 V ~ 50/60 Hz 0.085 A
Color Temperature Range:
2700‒6500 K
Wireless Connectivity:
Wi-Fi IEEE 802.11 b/g/n 2.4 GHz
Service Life:
Approx. 15,000 h
Operating Temperature:
-10°C to 40°C
Operating Humidity:
0‒85% RH
Operating Frequency:
2412 ‒ 2480 MHz
Maximum Output Power:
20 dBm
Dimensions:
ф60x110 mm