User's Manual
9
2. Use the mount to predict the position of the front cam to be
installed
（
Attach the electrostatic adhesive lm
）
Wipe the windshield clean.(To avoid that the video quality is
aected by dirty)
Wipe the windshield clean of dirt and grease with a commercially available
cleaning cloth.
※
If there is dirt or dust on the windshield, or if the electrostatic adh esive lm
is repeatedly removed, the adsorption strength may decrease and the dash
cam may fall while driving.
2-1
Tear of paper from the electrostatic lm's adsorption sheet side.
Attach the electrostatic lm to the windshield at the position where
you decided to install the front cam.
2-2
2-3