User's Manual

6
1.Remove the SD Card
Remove/Insert the SD card
In this manual, "Micro SD card" is referred to as "SD card" unless otherwise noted.
※
This dash cam supports micro SD cards of 8 GB or more and 256 GB or less. (SD
write speed U3 or higher)
Warnings
If the optional multi-battery or power supply unit with voltage monitoring function is
connected, disconnect the power cord from the main unit rst.
Turn o󰀨 the car's engine.
Push the SD card in, let it pop out a little, then pull it out.
After turning o󰀨 the power, make sure that the power LED is o󰀨 for
at least 3 seconds.
※
Please be careful not to lose the SD card when it pops out.
※
The SD card is so small that if dropped in the car, it may get into the
space between the seats.
・
After turning the power o󰀨, make sure that the power indicator LED (Red) is o󰀨
for at least 3 seconds before the next process.
・
The SD card can only be inserted in one direction. Insert the SD card as shown
in the gure below. Pushing the card in forcibly may damage the dash cam.
・
Please ensure to format SD cards before using them in the dash cam.
1-1
1-2