Instruction manual

– 5 –
1–7 Installing the USB driver
1–7–1 Before installation
Installation of the USB driver is required when connecting the interface cable to your computer for the
first time. Connection to the ECU is not required when installing the driver.
1–7–2 Installation Procedure (Installing from the CD)
(1) Connect the interface cable to the USB port of the computer.
After connecting the cable, an icon and message appear in the computer’s task bar.
(2) Insert the CD in the CD drive. When the “Found New Hardware Wizard” screen appears and asks
“Can Windows connect to Windows Update to search for software?” select “No, not this time” and
click “Next”.
* There are two installation methods.
(1) Install from the CD.
(2) If you cannot use the CD when you connect the interface cable for the first time, copy the driver
files from the CD onto the computer and then specify the driver files to install them.
The driver files are in the “KITUSBCDM 2.02.04 FTDI DRIVER” folder on the CD. Copy the
whole folder onto the computer.
* The appearance of screens may differ depending the type of PC in use.