Instruction manual

– 4 –
Select [Install] and installation starts. Upon
finishing installation, Fig. 7 Setup completion
screen is shown.
When [Finish] is pressed, setup in completed.
Upon finishing setup, "YEC FI Matching System"
shortcut is displayed on desktop and on start
menu. Program maybe started from this
shortcut.
1–6 Copy of base data
1–6–1 Copy procedures
Copy the base data stored in the installed CD to
“C:\YMS_DATA” manually.
Base data
Fig. 7: Set up completion
CAUTION:
Any combination of base data and ECU not shown above will generate an error.
Always use one of the above combinations.
Model year Model Name of base data KIT ECU
2006 YZF-R6 R6-06_BaseData_00.ycz 2C0-8591A-70
2007 YZF-R6 R6-07_BaseData_00.ycz 2C0-8591A-71
2008 YZF-R6 R6-08_BaseData_00.ycz 2C0-8591A-80
2009 YZF-R6 R6-09_BaseData_00.ycz 2C0-8591A-90
2010 YZF-R6 R6-10_BaseData_00.ycz 2C0-8591A-91
2011 YZF-R6 R6-11_BaseData_00.ycz 2C0-8591A-92
2007 YZF-R1 R1-07_BaseData_00.ycz 4C8-8591A-70
2008 YZF-R1 R1-08_BaseData_00.ycz 4C8-8591A-80
2009 YZF-R1 R1-09_BaseData_00.ycz 14B-8591A-70
2010 YZF-R1 R1-10_BaseData_00.ycz 14B-8591A-71
2011 YZF-R1 R1-11_BaseData_00.ycz 14B-8591A-72