Instruction manual

– 40 –
5–3 Monitor
5–3–1 Monitor
Processed value inside ECU is displayed
simplified. Functions at less than 4000 rpm by a
simplified monitor for function confirming
(diagnosis) such as input sensor, etc. Since it is
not a real time display, transient changes cannot
be confirmed.
(1) Start button
Starts communications. When
communication is started, the inscription
changes to "Stop." When pressed during
communications, communication is ended
and the inscription returns to "Start." Also,
communication ends when the dialog is
closed.
5–3–2 Item set
Open set monitor data dialog and set Items.
(1) List of items
(2) List of monitor dialog items
>>[A] Addition of items
<<[D] Deletion of items
Items selected as monitor dialog items are
automatically stored when YMS.exe is ended.
Monitor... Ctrl+M ••Monitor dialog is displayed
Item set... ••Item setting dialog of the monitor is displayed.
Fig. 31: Monitor dialog
(2) Addition/deletion of items to be inputted
on monitor screen.
Items to be outputted to
monitor screen
(1) List of items
Fig. 32: Set monitor data dialog
[Set monitor data dialog]