Instruction manual

– 38 –
5–1–2 Close
Close the ycz File being edited.
In case data editing was made from the file
opened time or the file save time, a message to
check whether data being edited may be closed
without file saving is shown.
Also when data editing was made from the time
"Tool>Read from ECU" or "Tool>Write to ECU
was conducted, a close confirming message is
shown to check whether closing may be made
without writing to EUC of data being edited.
5–1–3 Save as...
A name is attached to the ycz File being edited
and saved.
A Windows standard Save As dialog opens for
saving with a name attached to the file.
File being edited may be given an optional name
and saved. It is also possible to overwrite an
existing file and save.
5–1–4 Directory...
A Default directory is set.
A folder to be opened by default when
conducting File>Open, File>Save as, may be
set. The set contents are registered and opened
by default at the next startup time.
5–1–5 Exit
Application is ended.
Fig. 27:
Close confirming message
(With difference to file)
Fig. 28:
Close confirming message
(With difference to ECU)
Fig. 29: Save As dialog
[Save as dialog]
Fig. 30: Directory setting dialog
[Directory setting dialog]