Instruction manual

– 32 –
(10) Comparison of other ycz File and ECU data
In case it is desired to compare other ycz
File and ECU data while leaving data
presently being edited as it is, select “File
data with ECU” and click Verify button.
Open the open file dialog and specify the
other ycz Files desired for comparison with
ECU members.
* At this time, keep power to ECU ON.
(11) Comparison of Edit data with other ycz File
In case it is desired to compare data
presently being edited with other ycz File,
select “Edit area with File data” and click
Verify button.
The Open File dialog opens. Specify the
other ycz File which you desire to compare
with data presently being edited.
* ”Edit area With File Data” does not
conduct ECU communication because of
comparison between the data presently
being edited and the ycz File.
Select "File data with ECU" and
click Verify button.
If compared data matches, "Same"
is indicated in the status display but
if data does not match, then
"Difference label" is displayed.
Fig. 22:
Data compare dialog (File data with ECU)
Select "Edit area With File Data"
and click Verify button.
If compared data matches, "Same"
is indicated in the status display but
if data does not match, then
"Difference label" is displayed.
Fig. 23:
Data Compare dialog (Edit area with File data)