Specifications

°
7
1.4.3 - Setting intake camshaft
The method that consists to set up intake camshaft is similar to exhaust setting.
 Measurement of event angle
 Reach maximum lift of intake valve by driving crankshaft
 Adjust intake gage scaling in “0 mm” position
 Lift down intake valve about 3mm by turning crankshaft counter-clockwise
 Lift up the valve to reach 2mm before maximum lift by turning the crankshaft clockwise
(position of the disc = X from inside angle on the disc)
 Symmetrically after maximum lift, lift down the intake valve to 2mm by turning the
crankshaft clockwise (position of the disc =Y from inside angle on the disc)
 Calculate camshaft event angle by using the following formula:
Intake event angle = (X+Y)/2 (From inside disc angle scale)