Specifications

°
7
1.4 - Practical Method
1.4.1 - Locating angle disc to TDC
The first stage of camshaft setting consists to locate crankshaft position. Crankshaft position is
displayed by an angle disc. To fit the disc to the engine, unscrew the bolt situated on the right side
of the engine crankshaft. Then, with a 22mm socket on a ratchet, you can drive the engine
crankshaft.
Then, fit a needle to indicate the crankshaft position.
Finally, screw the TDC detecting tool in the spark plug hole.
TDC detecting tool
Needle indicator
Disc lock side bolt