Specifications

TL n°2

Engine rev.

(possible to change axis value)

Throttle position

(possible to change axis value)

Setting Fuel Map 1 & 2

To adjust correctly the Fuel MAP, we recommend to combine kit wire

harness with a data acquisition system. By this way it become possible to

adjust correctly the Air / Fuel ratio.

For both bike R1 and R6, A/F target should be around :

• A/F target on opening throttle between 12 & 12.5

• A/F target on full gas between 12.8 AND 13.3

If you don’t use MAP1 & MAP2 function, you should set both MAP with same values in order to

avoid any malfunction in switching error.