Specifications

TL n°2
First step : select the base MAP
First step : select the base MAP
As indicated in the previous Technical letter, ECU proposes two base
mapping. Basically SBK/STK or SSP/STK (The choice is given by the engine
specification and achieved by the position of a loop on a coupler => TL n°1) .
Additionally, Yamaha Matching System controls two complementary
MAP switchable from the handle bar (left side). The switch to select MAP 1 or MAP
2 is delivered with the kit wire harness set. MAP 1 et MAP 2 are usable on Fuel and Ignition MAP.
S
T
K
S
S
STK
SBK
MAP 1
MAP 2
1
1
1
2
2
2