User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 72
2. Fill in the phone detail message on the pop-up windows.
Input IP Phone’s MAC address, configure Name, Call waiting, Line, Extension,
Label, Line active for the phone.
Figure D-4
Step 4. Turn on the power and connect the network cable to IP Phone.
Remark: The factory default setting of DHCP for IP Phone is enable, so you can
skip this step to step 5.
If the DHCP is disable, please follow below step to enable it. (e.g.: Yealink’s IP
Phone).
1. Login IP phone’s web page.
2. Enable DHCP.
Figure D-5
Step 5. Finish.
<Finish>