User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 64
APPENDIX A FAQ
Q1. How to Register SIP device？
A1:
1) Register SIP soft phone
Download the x-lite softphone from counterpath website
www.counterpath.com
After install the x-lite, right click the panel and select the SIP Account setting
and then configure it.
Display Name: 500
User Name: 500
Password: 500
Authorization Name: 500
Domain: 192.168.5.150
2) Register IP Phone (for example, Yealink’s T28 IP Phone)
a) Connect the T28’s WAN port to the switch. And it can get the IP from your
route.
b) Press the ‘OK’ key on T28 to get the IP of T28.
c) Put the IP on web browser then you can enter the T28 configure page
through this IP.
d) Put the SIP extensions info on the T28 IP phones.
Display Name: 501
User Name: 501
Register Name: 501
Password: 501
SIP Server: 192.168.5.150
Use the same method register another T28 to other extension.
Q2. How do I reset MyPBX back to the factory default settings?
A2: To perform a reset, please follow steps below:
Step 1: Press the ‘Reset’ button on the back of the unit labeled reset.
Step 2: Hold press down for 5 seconds and Watch the lights on the front of
the MyPBX. When the status light turn red, let go of the reset button.
Step 3: When the RUN status light start blinking the MyPBX will be back to
its factory settings.
Step 4: To access the configuration page, release and renew the IP address
on your computer and then open Internet Explorer and type 192.168.5.150
in the address bar.
Step 5: Login to the device with the Username ‘admin’ and the Password
‘password’, in order to reconfigure the device.