User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 35
Figure 3-27
3.5.5 Paging and Intercom
Paging and Intercom is for specific phones that are capable of Paging or
Intercom. It can be used to make an announcement over the speakerphone on
a phone or a group of phones. Targeted phones will not ring, but answer
immediately into speaker-phone mode. This section is for configuring group
paging, intercom is configured through Feature Codes.
This feature should work with Yealink's T28,T26,T22,T20,T10T,T9CM and
possibly other manufacturer's SIP phones(not ATAs). Any phone that is always
set to auto-answer should also work.