User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 33
·Extension For Checking Voice Mail
User may checking his voice mail by calling *2 on his phone (*2 is default
setting)
·Blind Transfer
User may blind transfer the incoming call by calling this feature code on his
phone (disable by default)
·Attended Transfer
User may transfer the incoming call by calling *3 on his phone (*3 is default
setting)
·Call Pickup
User may pickup the incoming call by calling *4 on his phone (*4 is default
setting)
·Intercom
Define the feature code that is used to prefix an extension to dial it as Intercom.
For instance setting this value to *5 would allow to initiate an intercom call with
extension 501 by dialing *5501.
2. Call Parking
·Call Parking
User may enable call parking by calling *6 on his phone (*6 is default setting)
·Call Parking in specify extension
User may enable the call parking in specify extension, then call the specify
extension in any phone to continue the calling.
·The waiting time for Call parking
The maximum time for the call parking, using “second” as unit.
3. Call Forward Preferences
·Reset to defaults
User may reset the call forward default value by calling *70 on his phone (*70
is default setting)
Note: When reset to defaults, the call forward default value will be:
Always forward: Disable.
Busy forward to voice mail: Enable
No answer forward to voice mail: Enable
Do not disturb: Disable
·Enable always forward
User may enable always forward by calling *71 on his phone (*71 is default
setting)
·Disable always forward
User may disable always forward by calling *071 on his phone (*071 is default
setting)