User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 20
Allows the user to specify the number of digits that will be stripped from the
front of the dialing string before the call is placed via the trunk selected in ‘Use
Trunk’ One might; for example, want users to dial 9 before their long distance
calls; however one does not dial 9 before those calls are placed onto analog lines
and the PSTN, so one should strip 1 digit from the front before the call is placed.
·Prepend digits before dialing
Allows the user to specify digits that are prepend before the call is placed via the
trunk. If a user's trunk required 10 digit dialing, but users were more
comfortable performing 7 digit dialing, this field could be used to prepend a 3
digit area code to all 7 digit strings before they are placed to the trunk. User may
also prepend a 'w' character for analog trunks to provide a slight delay before
dialing
·Calls From Extensions
Defines the Extension that calls, matching the specified pattern, will be placed
through.
·Make Outbound Calls on Trunk
Defines the Trunk that calls, matching the specified pattern, will be placed
through.
Figure 3-11