User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 14
·Voice Mail Access PIN Code
Voicemail Password for this user, Ex: ‘1234’.
·Send Voice Mail to Email Address
This option defines whether or not voicemails are sent to the Email Address as
attachments. Note: You need to have an smtp server configured for this
functionality.
3) VoIP Setting
·NAT
Try this setting when MyPBX is on a public IP, communicating with devices
hidden behind a NAT device (broadband router). If you have one-way audio
problems, you usually have problems with your NAT configuration or your
firewall's support of SIP+RTP ports.
·DTMF Mode – RFC2833，Info，Inband，Auto
4) Group
·Pickup Group
If a phone belongs in a pickup group that matches one of the call's pickup
groups, that phone may pickup the incoming call by calling *4 on his phone(*4
is default setting,it can be changed in page Feature Codes>General>Call
Pickup).
5) Follow me
The mode of call forwarding when there’s incoming call on this extension. Admin
can set up the call forwarding type for this extension.
6）Other Options
.Call Waiting
Check this option if the User or Phone should have Call-Waiting capability. If this
option is checked, busy transfer will not be available.
.hasmanager
Check this option if allow user to access MRI(MyPBX Recording Interface:Check
Voice Mail).Users may access MRI by using extension number and extension
password.