User manual

MyPBX-SOHO User Manual
www.yeastar.com Page 12
The Caller ID (CID) string would be used when this user calls another internal
user.
2) Voice Mail
·Voice Mail Access PIN Code
Voicemail Password for this user, Ex: ‘1234’.
·Send Voice Mail to Email Address
This option defines whether or not voicemails are sent to the Email Address as
attachments. Note: You need to have an smtp server configured for this
functionality.
3) Flash
·rxflash
sets the amount of time, in milliseconds, that must have passed since the last
hook-flash event received by MyPBX before it will recognize a second event. If
a second event occurs in less time than defined for Flash, then MyPBX will ignore
the event. The default value of Flash is 1000 ms, and it can be configured in
1ms increments.
4) Group
·Pickup Group
If a phone belongs in a pickup group that matches one of the call's pickup
groups, that phone may pickup the incoming call by calling *4 on his phone(*4
is default setting, it can be changed in page Feature Codes -> General -> Call
Pickup).
5) Follow me
The mode of call forwarding when there’s incoming call on this extension. Admin
can set up the call forwarding type for this extension.
6）Other Options
.Call Waiting
Check this option if the User or Phone should have Call-Waiting capability. If this
option is checked, busy transfer will not be available.
.hasmanager
Check this option if allow user to access MRI(MyPBX Recording Interface:Check
Voice Mail).Users may access MRI by using extension number as username and
voicemail secret as password.