Installation guide

NeoGate TA FXS Gateway Quick Installation Guide
http://www.yeastar.com 10/12
4. NeoGate TA Series Basic Configurations
4.1 Getting an IP Address
NeoGate provides web-based configuration interface for administrator and account user. The user can
manage the device by logging in the Web interface.
NeoGate TA FXS Gateway uses DHCP to pick up an IP address. Use an analog phone connected to the FXS port
of the Gateway, press *** to get into the IVR menu. Enter 1 to obtain the Gateway’s IP address.
Access path: http://[IP address]
User Name: admin;
Password: password
Default SIP UDP port: 5060
4.2 Logging in the Web Configuration Panel
Start the browser on PC. In the address bar, enter the IP address, click “Enter” button and then you can see
NeoGate Web Configuration Panel login page (See Figure 4-1).
Figure 4-1 NeoGate Web Configuration Panel Login Page
Downloaded from www.Manualslib.com manuals search engine