Installation guide

MyPBX U520 Installation Guide
http://www.yeastar.com 12/14
4.2 Logging in the Web Configuration Panel
Firstly, please check if the IP address that assigns to the network port (LAN or WAN) is in the same segment
with the PC and which can be connected when commit ‘Ping +MyPBX IP address’ command. Start the
browser on PC. In the address bar, enter the IP address, click ‘enter’ button and then you can see MyPBX
Web Configuration Panel login page (See Figure 4-1).
Figure 4-1 MyPBX Web Configuration Panel Login Page
Enter the Admin User Name and Password to log in.
Figure 4-2 MyPBX Admin Configuration Interface
Via the configuration interface, the admin can make all the system configurations, including network settings
(LAN, WAN, Firewall, VPN, DDNS, VLAN, etc.); system parameters configuration (System prompts, Time zone,
Password, etc.); internal settings (Web access port, User extension range, Business hours, Conference room,
Paging and intercom, Music on Hold, etc.); inbound routes; outbound routes; user account management (add
or delete an extension account, IP restriction, features setup, etc.); extended function management (Call
queue, Conference room, IVR, etc.); call logs (Search, Download); firmware update and reset, etc.
Please note that after saving the changes, please remember to click the “Apply changes” button to make