Installation guide

MyPBX U520 Installation Guide
http://www.yeastar.com 11/14
switch on the power. Then MyPBX U520 will start booting. In the meantime, users would see that the
‘POWER’ and ‘RUN’ indicator lights would turn on.
Please switch off the power before plugging or unplugging the cables.
3.2.5 Overall Flow Chart
Figure 3-8 Overall Flow Chart
4. MyPBX U520 Basic Configurations
4.1 Factory Defaults
MyPBX U520 provides web-based configuration interface for administrator and account user. The user can
manage the device by log in the web interface.
The factory default IP address:
LAN: 192.168.5.150;
Access path: http://[IP address]
User Name: admin;
Password: password
Default SIP UDP port: 5060
There are 6 extensions set up by default. The user could use these extensions directly, edit or delete them.
Their extension numbers are “300”-“305” (6 numbers in a row) whose passwords are “pincode + respective
extension number”.