User manual

MyPBX Standard User Manual
www.yeastar.com Page 18
information will prevent the trunk from registering.
·Type
SIP – Identifies whether the trunk sends and receives calls using the VoIP
protocol SIP.
·Provider Name
A unique label to help you identify this trunk when listed in outbound rules,
incoming rules etc. Ex: 'yeastar'.
·Hostname/IP
Service provider’s hostname or IP address.5060 is the standard port number
used by SIP protocol. Don’t change this part if it is not required.
.Domain
VoIP provider’s server domain name.
·Username
Username of SIP account. Used for SIP trunk registration.
.Authorization name
Used for SIP authentication. Leave this blank if not required.
·Password
Password of SIP account.
·Enable Outbound Proxy Server
Figure 3-9
2. Add IAX Trunk
Input correct IAX information (provided by VOIP provider). Inaccurate
information will prevent the trunk from registering.
·Type
IAX – Identifies whether the trunk sends and receives calls by using the VoIP
protocol IAX.
·Provider Name
A unique label to help you identify this trunk when listed in outbound rules,