User manual

MyPBX Standard User Manual
www.yeastar.com Page 14
The password for the user's sip account, Ex: ‘12t3f6’
·Name
A character-based name for this user, EX: ‘Bob Jones’
·Caller ID
The Caller ID will be used when this user calls another internal extension.
2) Voice Mail
·Voice Mail Access PIN Code
The voicemail Password for this user, i.e. ‘1234’.
·Send Voice Mail to Email Address
This option defines whether or not voicemails are sent to an Email Address as
attachment.
Note: You need to have an SMTP server configured for this functionality.
3) VoIP Setting
·NAT
Try this setting when MyPBX is on a public IP and communicating with devices
hidden behind a NAT device (broadband router). If you have one-way audio
problems, you usually have problems with your NAT configuration or your
firewall's support of SIP or RTP ports.
·DTMF Mode – RFC2833, Info, Inband, Auto.
4) Group
·Pickup Group
If a phone is assigned to a pickup group that is shared with a ringing phone, that
phone may pick up the incoming call by pressing *4. *4 is the default setting,
but it can be changed under Feature Codes -> General -> Call Pickup.
5) Follow me (Call Forwarding)
This function sets inbound call forwarding on an extension. An administrator can
configure Follow Me for this extension.
6）Other Options
.Call Waiting
Check this option if the User or Phone should have Call Waiting capability. If this
option is checked, busy transfer will not be available.
.Hasmanager/Web Access
Check this option to allow a user to access the MRI web interface, which allows
a user to manage their saved voicemail messages and recordings. Users may
access MRI by logging in with their extension number and voicemail password.