Installation guide

MyPBX U5XX Administrator's Guide
www.yeastar.comPage29
After you enter the new password, MyPBX will prompt the password strength. It
is recommended that you use numbers, upper-case letters, and lower-case
letters to increase the security.
When you log in MyPBX using “admin” account, you can enable “user” and “cdr”
account; also, you can change their passwords.
Figure 5-13 Modify admin‟s Password
User account:
User account is disabled by default and its default password is “password”.
When enabling “user” account for the first time, MyPBX will ask you to
change “user” password. If you don‟t change it, you can‟t enable “user” account.
To change the password, select “user” in “User”, enter the old password and
new password, click “Save”.The system will then prompt you to re-login using
your new password.
After you enter the new password, MyPBX will prompt the password strength. It
is recommended that you use numbers, upper-case letters, and lower-case
letters to increase the security.
Figure 5-14 Modify user‟s Password
After enabling “user” account, you can log in MyPBX using “user”. “user” account
can change its own password.
CDR account:
“cdr” account is disabled by default and its default password is “password”. You
can enable it after you log in MyPBX using “admin” account.
To change the password, select “cdr” in “User”, enter the old password and new
password, click “Save”.The system will then prompt you to re-login using your
new password.
After you enter the new password, MyPBX will prompt the password strength. It
is recommended that you use numbers, upper-case letters, and lower-case