Installation guide

MyPBX U510 Installation Guide
http://www.yeastar.com 12/17
3.2.3 Connection of FXS ports
The FXS port could be connected to an analog phone with a phone line.
For instance, if No.6 and No.8 connectors are FXS ports, the connection could be depicted as below:
Figure 3-7 Connection of FXS ports and Status LED
3.2.4 Power Connection
Once users have made sure that device installation, cable connection and power type is correct, please
switch on the power. Then MyPBX U510 will start booting. In the meantime, users would see that the
‘POWER’ and ‘RUN’ indicator lights would turn on.
Please switch off the power before plugging or unplugging the cables.
3.2.5 Overall Flow Chart
Figure 3-8 Overall Flow Chart