Installation guide

MyPBX U300 Installation Guide
http://www.yeastar.com 10/13
Default SIP UDP port: 5060
There are 6 extensions set up by default. The user could use these extensions directly, edit or delete them.
Their extension numbers are “300”-“305” (6 numbers in a row) whose passwords are “pincode + respective
extension number”.
4.2 Logging in the Web Configuration Panel
Firstly, please check if the IP address that assigns to the network port (LAN or WAN) is in the same segment
with the PC and which can be connected when commit ‘Ping +MyPBX IP address’ command. Start the
browser on PC. In the address bar, enter the IP address, click ‘enter’ button and then you can see MyPBX
U300 Web Configuration Panel login page (See Figure 4-1).
Figure 4-1 MyPBX Web Configuration Panel Login Page
Enter the Admin User Name and Password to log in.
Figure 4-2 MyPBX Admin Configuration Interface
Via the configuration interface, the admin can make all the system configurations, including network settings
(LAN, WAN, Firewall, VPN, DDNS, VLAN, etc.); system parameters configuration (system prompts, time zone,
password, etc.); internal settings (Web access port, user extension range, business hours, conference room,