MyPBX U300 Installation Guide MyPBX U300 Installation Guide Version: V1.0 Yeastar Technology Co., Ltd Date: 25th, July, 2012 http://www.yeastar.
MyPBX U300 Installation Guide Contents 1.Preparation before installation .................................................................................................... 3 2. Hardware specifications .............................................................................................................. 4 2.1 Overview ............................................................................................................................ 4 2.2 Led indicators and ports ..........................
MyPBX U300 Installation Guide About MyPBX U300 MyPBX U300 is a standalone embedded hybrid PBX specially designed for businesses and offices up to 100 users which is characterized by an embedded PRI（E1/T1/J1）port with up to 30 lines and 2 FXS ports in the one compact system, providing higher density trunking for offices using E1 PRI signaling. It enables the company to benefit from the latest VoIP technology and traditional reliability at the same time.
MyPBX U300 Installation Guide 2. Hardware Specifications 2.1 Overview Figure 2-1 MyPBX U300 2.2 LED Indicators and Ports Figure 2-2 MyPBX U300 Front Panel http://www.yeastar.
MyPBX U300 Installation Guide Figure 2-3 MyPBX U300 Rear Panel LED Power Indication Power status Status On Off RUN MyPBX status Blinking Not Blinking/Off Description The power is switched on The power is switched off MyPBX is running properly MyPBX goes wrong Ports RJ11 ports Ethernet ports Description FXS port: For the connection of analog phones. MyPBX U300 provides two 10/100M adaptive RJ45 Ethernet ports, marked as LAN and WAN.
MyPBX U300 Installation Guide Operating Temperature 0°C~50°C (32°F~122°F) Storage Temperature -10°C~65°C (14°F~149°F) Operating Humidity 5%~90% (Non-condensing) Storage Humidity 0%~95% (Non-condensing) Weight 1.2kg 3. MyPBX U300 Installation To avoid unexpected accident, personal injury or device damage, please read the following instructions before installing MyPBX U300. 3.
MyPBX U300 Installation Guide 3.2.2 Connection of E1/T1 ports MyPBX U300 supports one E1/T1 port. Below are the connection instructions. 1. Connection of E1/T1 ports The E1/T1 port could be connected to the E1 line or the E1 port of traditional PBX.
MyPBX U300 Installation Guide Figure 3-2 Connection of E1/T1 port 3.2.3 Connection of FXS ports The FXS port could be connected to an analog phone with a phone line. The connection could be depicted as below: Figure 3-3 Connection of FXS ports http://www.yeastar.
MyPBX U300 Installation Guide 3.2.4 Power Connection Once users have made sure that device installation, cable connection and power type is correct, please switch on the power. Then MyPBX U300 will start booting. In the meantime, users would see that the ‘POWER’ and ‘RUN’ indicator lights would turn on. Please switch off the power before plugging or unplugging the cables. 3.2.5 Overall Flow Chart Figure 3-4 Overall Flow Chart 4. MyPBX U300 Basic Configurations 4.
MyPBX U300 Installation Guide Default SIP UDP port: 5060 There are 6 extensions set up by default. The user could use these extensions directly, edit or delete them. Their extension numbers are “300”-“305” (6 numbers in a row) whose passwords are “pincode + respective extension number”. 4.
MyPBX U300 Installation Guide paging and intercom, music on Hold, etc.); inbound routes; outbound routes; user account management (add or delete an extension account, IP restriction, features setup, etc.); extended function management (call queue, conference room, IVR, etc.); call logs (search, download); firmware update and reset, etc. Please note that after saving the changes, please remember to click the “Apply changes” button to make the changes take effect. 4.
MyPBX U300 Installation Guide Step 1: Make sure the IP terminal and MyPBX are interconnected Step 2: Enter the IP address of MyPBX when configuring “SIP server”, “Proxy server”, or “Registration server” of the IP terminals, and the default SIP UDP port is 5060. Step 3: Enter the account registration information with the “extension number/password” of the default or newly setup extensions of MyPBX. For more information on terminal configuration, please refer to http://www.yeastar.com/Solutions/SIP_Phones.
MyPBX U300 Installation Guide 5. Conclusion This Installation Guide only explains the installation and basic settings of MyPBX U300 for making and receiving calls. For more functionality and advanced settings of MyPBX U300, please refer to the relative documents as below: “MyPBX U300 Datasheet” “MyPBX U300 Administrator’s Guide” “MyPBX U300 User’s Guide” [The End] http://www.yeastar.
