Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page73
6.3.2 Speed Dial Settings
Figure 6-27 Speed Dial Page
1) Options
·The prefix of speed dial
The prefix should be dialed before the speed dial number. Default is *99
Figure 6-28 Speed Dial Settings
2) Add new speed dial.
·Source Number
The speed dial number.
·Destination Number
The number you want to call.
e.g. The source number is ”123”. The destination number is 5503305.The prefix
number is *99.You can use an extension with any type to dial *99123, then it
will call to number 5503305.
Note: Don‟t forget to add the outbound dial prefix if you would like to dial the
speed dial number through trunk.