Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page58
6.1.2.4 Not configured phone
In this section, MyPBX will scan all the supported IP phones and display here, we
can click the 'MAC address' of IP phone and input the corresponding information
in the pop-up window, like figure 6-13.
Figure 6-17 Not Configured Phone List
6.1.2.5 Upload a file
Click “Upload a file” and choose the configure file of IP phone in the popup
window.
Note: the file format must be
Yealink: .cfg file
Snom: .htm file
Grandstream: .xml file
Please edit the configuration files in advance before uploading.
Figure 6-18 Upload Configuration File