Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page36
5.3.10 Security Center
You can check MyPBX security configuration in “Security Center” page. And also,
you can enter the relevant security settings page rapidly.
Firewall:
Figure 5-26 Security Center-Firewall
In the “Firewall” tab, you can check firewall configuration and alert settings. By
clicking the relevant button, you can enter the configuration page directly.
Service:
Figure 5-27 Security Center-Service
In “Service” tab, you can check AMI/SSH/TFTP status. For AMI/SSH, you can
enter the according page by clicking the button in “Setting” column. For TFTP,
you can directly disable or enable it.
Port:
Figure 5-28 Security Center-Port
In “Port” tab, you can check SIP port and HTTP port. You can also enter the
relevant page by clicking the button in “Setting” column.