Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page32
Figure 5-21 AMI Settings
Username & password: after enabling AMI, you can use this username and
password to log in MyPBX AMI
IP Restriction: you can set which IP can log in MyPBX AMI interface
5.3.8 Alert Settings
If the device is attacked, the system will notify users the alert via call or E-mail.
The attack modes include IP attack and Web Login.
More details for the system security configuration, please refer toAPPENDIX G
MyPBX Security Configuration Guide.
Figure 5-22 Alert Settings
1.IPATTACK
When the system is attacked by IP address, the firewall will add the IP to auto
IP Blacklist and notify the user if it match the protection rule.
1) Phone Notification Settings
·PHONE Notification
Whether enable phone notification.
·Number
The numbers could be set for alert notification, users can setup multiple
extension and outbound phone numbers. Please separate them by “;”.
Example: “500;9911”, if the extension has configured Follow Me Settings, the
call would go to the forwarded number directly.