Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page19
·NO.2
Click the NO.2 you can edit the first VLAN over Wan.
·VLAN Number
.The VLAN Number is a unique value you assign to each VLAN on a single device.
·VLAN IP Address
Set the IP Address for MyPBX VLAN over Wan.
·VLAN Subnet Mask
Set the Subnet Mask for MyPBX VLAN over Wan.
·Default Gateway
Set the Default Gateway for MyPBX VLAN over Wan.
5.1.5 VPN Settings
A virtual private network (VPN) is a method of computer networking--typically
using the public internet--that allows users to privately share information
between remote locations, or between a remote location and a business' home
network. A VPN can provide secure information transport by authenticating
users, and encrypting data to prevent unauthorized persons from reading the
information transmitted. The VPN can be used to send any kind of network
traffic securely. MyPBX supports OpenVPN.
Figure 5-5 OpenVPN Settings
·Enable VPN
·Import VPN Config
Import configuration file of OpenVPN.
Note: Don't configure 'user' and 'group' in the 'config' file.
You can get the config package from the OpenVPN provider.
5.1.6 DDNS Settings