Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page14
5 System
Click to access.
In this page, we can configure the network settings, firewall settings, storage
management and some other preferences like firmware update and hot
standby.
5.1 Network Preferences
5.1.1 LAN Settings
Figure 5-1 LAN Settings
·DHCP
If this option is set, MyPBX will use DHCP to get an available IP address from
your local network. Not recommended or you cannot access MyPBX without
the right IP address
·Enable SSH
This is the advance way to access the device, you can use the putty software
to access the device.In the SSH access, you can do more advanced settings
and debug. Disabled by default.
·Port: the default is 8022;you change it to another one
·Hostname