Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page13
4.2 System Status
In this page, we can check the status of MyPBX system, including the hardware,
firmware version and the network status of LAN and WAN ports .
4.2.1 System Info
In this page, we can check the hardware/firmware version, or the disk usage of
MyPBX.
Figure 4-3 System Information
4.2.2 Network Status
In this page, the IP address of LAN and WAN port will appear, if OpenVPN is
configured well, they will be displayed here too.
Figure 4-4 Network Status