Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page126
10.2 Incoming call
10.2.1 Sample Routing to an IVR
Let‟s configure an incoming call to route to the IVR. In the IVR itself, let‟s
configure digit 0to route the call to extension 500, and digit 1 to route the
call to extension 501.
1. Add IVR
To add a new IVR, go to IVR Create New IVR
Figure10-5 Create IVR
2. Add Inbound Routes
As we can see from the Inbound Route of „VOIP_IN‟, all incoming calls from
SIP trunk will be sent to the IVR.