Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page101
6.7 Advanced Settings
6.7.1 SIP Settings
Figure 6-50 SIP Settings-General
1) General
·UDP Port
Port use for sip registrations, Default is 5060.
·TCP Port
Port use for sip registrations, Default is 5060.
·TLS Port
Port use for sip registrations, Default is 5061.
·TLS Verify Server
When using MyPBX as a TLS client, whether or not to verify server‟s certificate.
It is “No” by default.
·TLS Verify Client
When using MyPBX as a TLS server, whether or not to verify client‟s certificate.
It is “No” by default.
·TLS Ignore Common Name
Set this parameter as “No”, then common name must be the same with IP or
domain name.
·TLS Client Method