Installation guide

MyPBX U300 Administrator's Guide
www.yeastar.com Page87
·Destination
Configure where the faxes will be routed when faxes are detected.
·No detect
Do not detect faxes.
·Custom Email
Customize an E-mail address to receive the faxes. You should first configure the
„Voicemail Settings->SMTP Settings for Voicemail‟ correctly before you use this
option.
·Faxes
Send faxes to an extension. If choosing a FXS extension here, the fax will be
sent to the FXS port selected, you should connect a fax machine to this FXS port.
If Choosing a VoIP extension, the fax will be sent to the extension‟s voicemail as
an attachment.
Note: If you receive faxes with custom Email address, the „SMTP settings‟ of
„Voicemail Settings‟ should be configured successfully in advance. If you receive
faxes with E-mail address configured in VOIP extension voicemail, you should
first make sure the tested email to your email address works fine.